StripIt – Powerful finish remover for the toughest coatings

€489,00
Adding to Cart Added to Cart

Strip-It is a professional water-based stripper specially formulated to remove old stains and the most stubborn finishes from solid-wood homes, wood siding and decks.

Its neutral-pH gel formula works deep into the finish and can remove multiple layers in a single application, while remaining easy to use. Odorless, biodegradable and non-flammable, Strip-It provides an effective solution for preparing wood before a complete renovation.

Unlike traditional caustic strippers, Strip-It does not darken the wood, raise the wood fibers or damage Perma-Chinkjoints or Energy Seal sealants. It is particularly recommended when old finishes are difficult to remove with conventional strippers.

Protect sensitive surfaces and vegetation, and wear appropriate personal protective equipment, including gloves, safety glasses and protective clothing.

The surface must be clean and free of heavy dirt and debris.

Apply Strip-It generously with a brush, roller or airless sprayer.

On vertical surfaces, always apply the product from the bottom upward to prevent runs and ensure an even coating thickness.

Allow the product to work until the finish has completely softened. Depending on the type of finish, temperature and number of coats, this may take 30 minutes to several hours.

If the product begins to dry, apply another coat of Strip-It to keep the surface wet and the product active.

Remove the softened finish using a pressure washer at a minimum of 500 to 600 psi, working from the bottom upward, then perform a final rinse from the top downward.

Use pH test strips after rinsing. The rinse water should ideally have a pH between 6.5 and 7.5.

Allow the wood to dry completely before applying Perma-Chink renovation products.

✔ Ready-to-use stripper in gel form.

✔ Removes most water- or oil-based stains and finishes.

✔ Safe for Perma-Chink joints, Energy Seal sealants and the metal components of the house.

✔ Does not darken or discolor the wood.

✔ Water-based, low-VOC product that is more environmentally friendly than many traditional strippers.

✔ Coverage: approximately 4.5 to 9 m² per gallon (3.8 L) depending on the thickness of the finish being removed and the texture of the surface. A 5-gallon (18.9 L) pail can therefore treat approximately 23 to 46 m².

✔ For particularly resistant or high-performance finishes, Strip-It may be more suitable. It is recommended to test the product on a small area before treating the entire surface.

✔ After stripping, clean the wood with Log Wash, then apply the appropriate Perma-Chink finish.

Related Products