Lifeline Ultra-7 - Premium water-based exterior wood finish

Ensure the wood is clean, dry and free from dust, grease and any loose or failing finishes.

For restoration projects, clean the surface with Log Wash or restore weathered wood with Wood ReNew before application if required.

Stir thoroughly before and occasionally during application.

Apply an even coat using a brush, block brush (stain brush) or roller, following the direction of the wood grain.

Allow the recommended drying time before applying additional coats if required.

Do not apply in direct sunlight, during rain or when temperatures are outside the recommended application range.

✔ Long-lasting protection against UV rays, moisture and weathering.

✔ Breathable microporous coating that allows the wood to breathe while helping to repel water.

✔ Excellent resistance to peeling and flaking.

✔ Enhances the natural grain of the wood with an attractive satin finish.

✔ Available in a wide range of colours to complement every style of log or timber home.

✔ Suitable for log homes, timber homes, timber cladding, beams and other exterior wood surfaces.

✔ Approximate coverage:

• 1 gallon (3.8 L): approximately 23–33 m² (250–350 sq ft) on bare wood, depending on surface porosity.
• 5 gallons (18.9 L): approximately 115–165 m² (1,250–1,750 sq ft) on bare wood. 

✔ For maximum protection, seal all log ends with Log End Seal before applying the stain.

✔ Regular cleaning with Log Wash helps preserve the finish and extend its service life.